SM460P

The SM460P is a 46.0" analog/digital LCD display that offers a 800:1 contrast ratio, 1366 x 768 resolution, pixel pitch of 0.249mm H/V, Xtrawide™ 170°/170° viewing angle, scanning frequency of 30-70kHz horizontal and 50-85 vertical, and dual inputs to accommodate either an analog or digital signal.

1366 x 768 pixels
1 x Composite Video Input, 1 x YUV Input
1 x DVI-D Input, 1 x VGA Input

Specification:

Model Name: SM460P
LCD Panel Size :46" Diagonal
Display area: 1018.353mm (H) x 572.544mm (V)
Pixel Pitch: 0.7455mm (H) x 0.7455mm (V)
Type a-si TFT active matrix
Synchronization:
Horizontal 30 ~ 70 kHz
Vertical 50 ~ 85 Hz
Display Color: 16.7M Colors Colors
Resolution:
Optimum resolution: 1360 x 768 / 1366 x 768 @ 60Hz depends on graphics card used
Maximum resolution 1360 x 768 @ 60Hz
Input Signal, Terminated
RGB Analog , DVI(Digital Visual Interface) Compliant Digital RGB.
0.7Vp-p ±5%, Positive bright, 75 ohms ±10%(Terminated),
Separate H/V sync, TTL level, positive or negative
Maximum Pixel Clock
100 MHz(Analog, Digital)
Power Supply
AC 100 ~ 240 VAC(+/- 10%), 60/50 Hz ± 3Hz
Signal Cable
15pin-to-15pin D-sub cable, detachable, 1.8m
DVI-D to DVI-D connector, detachable, 2.0m
Signal Connectors
D-sub, BNC, DVI-D, YPbPr, S-VHS, VCR
Power Consumption
Less than 300W
Power Saving
Less than 5W
Dimensions (WxHxD)/ Weight
1,102 X 658 X 126.5mm / 43.4 X 25.9 X 5.0 inch / 28kg
1,102 X 715 X 293mm / 43.4 X 28.1 X 11.5 inch (With Stand) - Option / 30kg
1,312 X 715 X 293mm / 51.7 X 28.1 X 11.5 inch (With Speaker, With Stand) - Option / 33kg
VESA Mounting Interface
200mm x 200mm (for use with Specialty(Arm) Mounting hardware.)
Environmental considerations
Operating Temperature: 50°F ~ 104°F (10°C ~ 40°C)
Humidity: 10% ~ 80%, non-condensing
Storage Temperature: -4°F ~113°F (-20°C ~ 45°C)
Humidity: 5% ~ 95%, non-condensing
Audio Characteristics
Audio Input 1 RCA Jack Red(R) White(L), 0.5Vrms (-9dB)
Audio Input 2 RCA Jack Red(R) White(L), 0.5Vrms (-9dB)
PC Audio Input 3.5ØStereo Jack, 0.5Vrms (-9dB)
Frequency RF: 80Hz ~ 15kHz (at -3dB)
Response A/V: 80Hz ~ 20kHz (at -3dB)
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer
systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will
proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm(one
millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be
bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it
without uneasiness.
For example, the number of TFT LCD sub pixels that is contained in this product are 3,133,440.