Audio Visual Range

Broadcast Range

XT-DAC-HD.pdf

The DAC-HD brings exciting new features. In addition to being a high-quality 10-bit HD converter, the DACHD is "dual-rate" and works with both HD-SDI and SDI inputs. For HD-SDI inputs, the DAC-HD outputs full bandwidth HD component or VGA-style RGBHV video. For SDI inputs, component or composite SD outputs are supported. When connected to a multi-format monitor like the Sony 20L5, the DAC-HD will automatically provide an image from almost any HD or SD input format. The DAC-HD also features 2 equalized HD-SDI outputs.

Features

Low Cost, High Quality, 10-bit Dual Rate HD/SD D/A Conversion

Full Bandwidth HD Analog RGB or YPbPr Output (HD input)

Component/Composite SD Output (SD input)

2 Equalized Loop-Thru HD-SDI/SDI Outputs

5 wire RGBHV VGA-style HD output (HD input only)

HD Sync Selectable Between Bi-level and Tri-Level

4:3 Safe Area Graticule (HD)

5-18VDC Power

External Dip Switch Configuration

Specification

Inputs
HD-SDI or SDI SMPTE 259/292/296, 10-bit, BNC. Input Equalization: 125 Meter 1694 Cable

Outputs HD: YPbPr, RGB (SMPTE-274)

SD: YPbPr (SMPTE/N10, BetaÆ RGB, Y/C, NTSC/PAL)

13W3 wideband analog output connector (cable supplied)

HD-SDI/SDI Reclocked loop-thru, 2 x BNC

Sync HD: Tri-level or Bi-level, H/V Drive

SD: normal SD sync

Frequency Response HD: Y +0, -.5db to 30 MHz, C +/- .25db to 13 MHz

SD: Y +/- .25db to 5.5 MHz, C +/- .25db to 2.5 MHz

User Control (External Dipswitch)

YPbPr/RGB

Component/Composite (SD)

SD Pedestal

SD Blanking

HD 4:3 Graticule

SD NTSC/NTSC-J

Sync on Video on/off

Power +5-18VDC Regulated, 4 Watts
Dimensions 5.8" x 3.1" x 1" (147 x 79 x 25mm)